Electronics Engineer with Security Clearance

---

Job description

Duties Coordinate and serves as a technical expert and project leader for the implementation of engineering programs for calibration test and measurement equipment and systems. Prepare electronic test equipment specifications, performance requirements, and evaluation criteria for procurement. Conceptualize unusual or major potential difficulties or problems associated with the proposed use of novel or advanced concepts or methods. Analyze procurement production status including technical areas (test and evaluation) recommending new approaches and resolution of technical problems to insure the on time acquisition of required test, measurement and diagnostic equipment. Requirements Conditions of Employment Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation. This position requires you to obtain and maintain a Secret security clearance. This position requires up to 10% temporary duty (TDY) away from the permanent duty location, including overnight travel. This is an Army Acquisition and Technology Workforce Position which requires certification at Level III in the Acquisition Career Field of Engineering within 24 months of entrance on duty. This position requires the submission of a Financial Disclosure Statement, OGE-450, (5 CFR part 2634, subpart 1 USOGE, 6/08) at time of hire and on an annual basis. Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees
Current Department of Defense (DOD) Civilian Employee (non-Army)
Interagency Career Transition Assistance Plan
Land Management Workforce Flexibility Act
Military Spouses, under Executive Order (E.O.) 13473
Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
Priority Placement Program, DoD Retained Grade Preference Eligible
Veterans Employment Opportunity Act (VEOA) of 1998In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document . Basic Requirement for General Engineer: The Engineering occupation has specific educational requirements. Education above the high school level must have been completed in a U.S. college, university, or other educational institution that has been accredited by one of the accrediting agencies or associations recognized by the Secretary, U.S. Department of Education. A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. -OR- B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience equivalent to next lower grade level, GS-13 or NH-03 pay band in Federal service that includes: Having multiple engineering disciplines, including electrical, electronic, radiac, optical and industrial engineering in concert with professional knowledge of general engineering, and skill in applying, expertise in advanced engineering theories, principles, concepts, standards, and methods sufficient to analyze and resolve very complex or sensitive problems related to calibrations. You will be evaluated on the basis of your level of competency in the following areas: Engineering and Technology
Leadership
Oral Communication
Requirements Analysis Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13). Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: . Additional information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct deposit of pay is required. This position requires you to submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a(n) CP 16: Engineers and Scientists (Non-Construction) Career Field position. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits . click apply for full job details

<!– job description page –>