SURFACE MAINTENANCE MECHANIC LEADER (Title 32) with Security Clearance

---

Job description

Duties (1) Leader Duties: a. Assigns work orders to specific crewmembers and selects workers for various jobs on the basis of knowledge, skills, and abilities. Passes on to workers instructions received from the supervisor, demonstrates proper work methods, and starts work. Insures that needed plans, blueprints, material, and tools are available, and that needed stock is obtained from supply locations. Works along with other workers and sets pace performing non-supervisory repair work of the same kind and level as that done by the group led. Work performed by the incumbent involves troubleshooting, maintenance and major repairs on heavy-duty mobile equipment, combat, tactical, and automotive vehicles. b. Assures that there is enough work to keep the work crew busy. Checks work in progress and when finished for compliance with supervisor's instructions, work orders, and established shop procedures on work sequence, procedures, methods and deadlines; and directs or advises other workers to follow supervisor's instructions and to meet deadlines. Answers workers' questions regarding procedures, policies, written instructions, and other directives. Interprets work instructions and assists lower graded repairers or trainees in the more difficult and complex tasks. Provides information to the supervisor on status and progress of work, causes of delays, and overall work operations and problems. Assures that safety and housekeeping rules are followed. (2) Non-Supervisory Duties: a. Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Incumbent troubleshoots repairs and may overhaul major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with Modification Work Orders, Technical Manuals, Lubrication Orders, Maintenance Bulletins, Regulations or management policies. Incumbent may repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. b. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. c. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment. DUTIES CONTINUED UNDER EDUCATION Requirements Conditions of Employment NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform. Military Grades: Enlisted/Warrant Officer Minimum Grade - SSG (E-6) Maximum Grade - WO1 (W-1) Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard. IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO. ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION Qualifications GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE : In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, organize, and lead the work of others in fields directly related the repair function of this occupational series. Must have the ability to perform administrative functions; to read and interpret a variety of technical publications used in the repair of supported equipment. The ability to provide guidance to others in work related directly to this occupational series. Education DUTIES CONTINUED: d. Independently performs repairs and maintenance functions with little or no supervision in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team". Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems which use specialized diagnostic equipment to identify problems, complex fuel injection systems, and other similar complex systems. e. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested. f. May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms. g. Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production. (3) Performs other duties as assigned. Additional information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( Register Selective Service System : Selective Service System (sss.gov) ). ADDITIONAL REQUIREMENTS/CONDITIONS OF EMPLOYMENT: Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation

<!– job description page –>