NONDESTRUCTIVE TESTER with Security Clearance

---

Job description

Duties - Using the ultrasonic-eddy current processes, performs inspections of aircraft, engine, missile, ground support equipment, etc., parts and components, support equipment structural members, components, parts, and other materials for which inspection procedures and/or acceptability standards are inadequate or not available. - Using the radiographic equipment, performs inspections of aircraft, engine, missile, ground support equipment, etc., parts, components, support equipment structural members, components, parts, and other materials for which inspection procedures and/or acceptability standards are inadequate or not available. - Serves as NDI Technical Advisor, advising responsible shop supervisors, engineering, quality assurance and other related functions of defects found, their extent and their effect of the quality and serviceability of products. - Uses and maintains tools. Maintains records and documents actions. - Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment. Requirements Conditions of Employment U.S. Citizenship Required Males must be registered for Selective Service, see If authorized, PCS MAY be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: This posn is subject to provisions of the DoD Priority Placement Program Disclosure of Political Appointments May be required to work rotating shifts or uncommon tours of duty. Subject to call back to meet emergency situations. Incumbent must be able to obtain and maintain a secret security clearance. Prolonged standing, frequent lifting of parts and materials weighing up to 40 pounds unassisted, and occasionally over 50 pounds with assistance of lifting devices or other workers is required. Subject to eyestrain when using black light. Both hands and good eyesight required. Work requires stooping, bending, reaching, stretching, and climbing in, on, or through aircraft with equipment. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety. The work requires the employee to drive a motor vehicle. An appropriate, valid driver's license is required for the position Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-3700, Metal Processing Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is the ability to do the work of a NONDESTRUCTIVE TESTER without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of ultrasonic-eddy current and industrial x-ray radiographic methods and equipment of nondestructive testing to investigate failures in critical aircraft structures and components when considerable unknown factors are involved; and various shapes, sizes, and density of flaw indications in parts being tested. 2. Knowledge of safety regulations and procedures. 3. Skill to set up and operate ultrasonic, eddy-current, and radiographic equipment to examine a variety of parts, components, or material to detect hidden subsurface flaws, corrosion, and separation in bonded and honeycomb structures; and determine integrity of welds, precision dimensional and volume measurements, hardness of materials, and if defects found, render the article acceptable or unacceptable. 4. Skill to work with quality assurance and engineering personnel to modify inspection procedures and test standards to achieve inspection objectives. 5. Ability to develop, modify, and adapt ultrasonic-eddy current, industrial x-ray radiographic methods and techniques of nondestructive testing to investigate failures in critical aircraft structures and components when existing inspection procedures, techniques, and acceptability standards are nonexistent or not applicable; and interpret flaw indications and their relevance to the reliability of products. 6. Ability to read and interpret quality control directives, engineering drawings, NDI literature, and technical orders concerning nondestructive testing methods and procedures; document actions; and maintain records manually or on a computer terminal. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. PHYSICAL EFFORT: Prolonged standing, frequent lifting of parts and materials weighing up to 40 pounds unassisted, and occasionally over 50 pounds with assistance of lifting devices or other workers is required. Subject to eyestrain when using black light. Both hands and good eyesight required. Work requires stooping, bending, reaching, stretching, and climbing in, on, or through aircraft with equipment. WORKING CONDITIONS: Works inside shop and in areas adjacent to or removed from the shop. Exposed to oils, which may cause dermatitis or allergy. Subject to possible radiation damage of body tissues. Wears radiation monitoring devices, standard safety equipment, and protective clothing. Education This job does not have an education qualification requirement. Additional information Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location. Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information. 120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur. Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist. Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement. Direct Deposit: All federal employees are required to have direct deposit. Incentives: Recruitment and/or retention incentives may or may not be used. If you have questions regarding this announcement and have hearing or speech difficulties click here . Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit GSA Bulletin FTR 20-04 here for additional information. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits t

<!– job description page –>