SURFACE MAINTENANCE MECHANIC with Security Clearance

---

Job description

Duties The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. (1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. (2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. (3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. (4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. (5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. This is NOT an all-inclusive list of duties. Requirements Conditions of Employment KEY REQUIREMENTS: Open to all United States military branches. Military members: Submit vMPF rip, DVR, ERB, ERS, MBS, PDR or equivalent with resume. Refer to Required Documents below for acronym titles. Prior service members: Submit a DD Form 214, Member 4 Copy WYARNG Recruiting Website: Must be assessed into WY ARNG before appt. May take up to 120 days. Must become a member of the Wyoming Army Nat'l Guard before appt. Recruitment/Relocation Incentive MAY BE authorized, if eligible. Subject to funding and TAG approval. PCS is not authorized in lieu of incentives. May be required to successfully complete a trial/probationary period. Federal employment suitability as determined by a background investigation. Indefinite position may convert to Perm if funding/position is available. CONDITIONS OF EMPLOYMENT & NOTES Technicians are paid through Direct Deposit/Electronic Funds Transfer (DD/EFT). Military Technicians are ineligible for military enlistment, retention, and student loan repayment bonuses. Acceptance of a Technician position over 180 days will result in suspension or termination these military incentives. It is the applicant's responsibility to contact the Wyoming Army National Guard Education Services Officer, for more information regarding military enlistment, retention and student loan repayment incentives. Relocation expenses will not be paid by the Government unless noted in the Announcement. Military Technicians in the excepted service will wear the appropriate uniform while performing as a technician. Veteran's preference does not apply to National Guard Technician positions in accordance with Title 32 USC 709(f). Indefinite employees may be terminated or displaced at management's discretion with a 30-day written notice. Must be able to obtain and maintain the appropriate security clearance of the position. Position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. May occasionally be required to work other than normal duty hours; overtime may be required. Duties and responsibilities of job may significantly impact the environment. Responsible to maintain awareness of environmental responsibilities as dictated by legal and regulatory requirements, organization, and its changing mission. Qualifications TECHNICIAN INFO Type of Appointment: Temporary Indefinite Tenure: Group 3 Work Schedule: Monday - Friday, 7:00 am - 4:30 pm FLSA: Exempt Telework: The duties of this position require primary physical presence. Situational telework may be considered on a case-by-case basis. Para/Line: 7821 / 200 and 210 Selecting Official: CSM James Swingholm AREAS OF CONSIDERATION: Primary consideration will be made from Areas 1, 2, and 4. If referrals are not made from the target category, subsequent referrals may next be made from Area 6 (if eligible). Area 1: All permanent and indefinite Wyoming National Guard (NG) WY ARNG employees assigned to UTES. Area 2: All permanent and indefinite Wyoming National Guard (NG) T32 Dual Status technicians employed within the Wyoming Army National Guard. Area 4: All current Drill Status Airmen and M-day soldiers of the Wyoming National Guard. Area 6: Current military members of the United States military branches or prior service members of one of those military branches. Must be willing/eligible to join the Wyoming Army National Guard as a military member prior to appointment to position. MILITARY GRADE: In-State Applicants: Min: E3/PFC Max: E9/SGM Out-of-State Applicants: Min: E3/PFC Max: E7/SFC Out-of-State enlisted applicant's military grade cannot exceed the maximum military grade authorized. Over-grade applicants must provide a written demotion statement of understanding with application, willingness to be administratively reduced in grade (state specific grade - E7/SFC) if selected for this position. A Demotion Statement of Understanding is located at: Applicants' under- or over-grade (without a written demotion statement of understanding with application) will not be considered for this vacancy. Acceptance of this position does not in any way constitute a military promotion. DESCRIPTION OF WORK: Work involves the repair, adjustment and maintenance of self-propelled transportation and other mobile equipment (except aircraft). MINIMUM REQUIREMENTS: Must possess experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: WG-08: Must possess experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufacturers' repair manuals, diagrams, and electrical schematics. WG-10: Must possess experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. NOTE: Minimum Requirements and Specialized Experience will be used to determine qualifications for the announced position. Applicants must provide from (e.g., 02/2015 - 03/2017 or Feb 2017 - Mar 2017) dates and hours worked per week with description of your specialized experience on the resume. MILITARY REQUIREMENTS: Selected candidates will be required to be in a compatible military grade and assignment prior to the effective date of placement. DRIVER'S LICENSE: Must possess a valid driver's license. Education This job does not have an education qualification requirement. Additional information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency ( ) The Wyoming Military Department's (WYMD) 335, Personnel - General Merit Placement & Promotion Plan, is available at: Please do not send/fax/courier/email any applications or resumes to the Wyoming National Guard Human Resource Office, you must apply on-line via . The Human Resource can only process materials received through USA Jobs. Military Technicians are ineligible for military enlistment, retention, student loan repayment bonuses, and other education incentives. Acceptance of a Technician position over 180 days will result in suspension or termination these military incentives. Contact unit representative or Wyoming Army National Guard Education Services Officer at for more information. TENURE: GROUP III - INDEFINITE Purpose: To fill a position that may last for more than 1 year where the need for an employee's services is not permanent or management expects the position to potentially become permanent (career or career-conditional) at some time in the future. Often used to backfill positions left vacant by employees entering Ti

<!– job description page –>